As soon as you have the equipment you need you now have to get together the ingredients for making your own strawberry beer. It is drunk quite a lot and many people enjoy the taste as the sweetness of the strawberry juice seems to complement the bitterness of the beer very well. Then into a pot you put the hops, malt and a 1 to 1.5 gallons of water and bring it to the boil and then let it boil for the next hour.

To begin with one needs to get together all the right equipment that makes a home brewing kit, including a large stainless steel pot, a large glass bottle known as a Carboy, some tubing, funnel and bucket (these should be made from food grade plastic).

. The best place to purchase such supplies is either from a home brewing retailer or online. As well as the strawberries you are going to need amber hopped syrup, crushed crystal malt and dry light malt, leaf hops, pectin enzyme and ale yeast starter.5 gallons of preboiled water.

Step 2 - Whilst the mixture above is standing steep the crystal malt in a gallon of water then rinse it thoroughly using a further 1 to 1. There are plenty of places online that offer information and advice on how to go about producing your own strawberry flavored beer if you want.

Step 1 - You need Gate Valves Manufacturers to make the yeast starter and you do this by putting a cup of dry malt extract into a quart of boiling water and then allow to cool down (temperature must not fall below 90 degrees Fahrenheit). After this time remove the pot from the heat and before allowing it to cool make sure that you remove the hops so that all is left in the pot is a mixture known as wort.

Step 3 - After an hour of boiling turn the heat down under the pot and slowly add to this the strawberries which have been washed, stemmed and then pureed. Plus you need a large spoon (wooden), a specialist valve for the Carboy, a thermometer and a siphon rake. The strawberry beer should then be left in the bucket for between 3 and 4 days before it is then bottled.

Step 4 ? Once the wort has cooled place into the carboy with some cold bottled water added to it and then add into the yeast starter and either on the same day or the next you need to add the pectin enzyme. Now leave to ferment before you rack it (put it into the plastic bucket). Mix together well and then leave the pot on the low heat for another 15 to 20 minutes.

Today this beer is readily available and there are plenty of sites online where one can purchase it from. However, if you want and you make your own beer already why not have a go at making your own strawberry beer instead.

Now that you have everything you need together you can now start to actually begin to brew your own beer. Below are the steps that one will need to take if you want to produce a great looking and tasting strawberry beer. When it reaches the required temperature to it you add the ale yeast and stir vigorously and then allow this to stand for two hours.Strawberry beer is an alcoholic beverage originally produced in Belgium that is not in fact made from fermented strawberries but is made by adding the juice of this fruit to beer